CARON S.R.L.
Via Puisle, 29 - 38051 Borgo Valsugana Italy
Tel. +39 0461 752398 - 754492
C.F./P.IVA: 01546590223
Via Puisle, 29 -
Copyright © 2020 CARON srl. All rights reserved.
+39 0461 752398
Ghepard “S” -
Technical Features
The two dashboards are clean and ergonomic for ease of use.
The electromagnetic blade engagement allows
to have a simple instrumentation and clean.
The use of such a component also reduces
premature wear of the drive belt.
The electromagnetic blade engagement allows
to have a simple instrumentation and clean.
The use of such a component also reduces
premature wear of the drive belt.
Control driving
Forward and reverse hydrostatic transmission with pedal.
This particular allows you to always have your hands
free to perform other maneuvers work (lift the deck,
use the lock, engage the blades and not last drive)
Forward and reverse hydrostatic transmission with pedal.
This particular allows you to always have your hands
free to perform other maneuvers work (lift the deck,
use the lock, engage the blades and not last drive)
Wheels fixed with 4 screws to a wheel hub
of large dimensions.
of large dimensions.
Differential lock integrated into hydrostatic drive allows it
to move even in the case of wheel slip.
to move even in the case of wheel slip.
Lever to lift the deck
Lever to lift the deck light and comfortable
allowing you to adjust the cutting height
and to detach the blades in the presence of bumps.
Lever to lift the deck light and comfortable
allowing you to adjust the cutting height
and to detach the blades in the presence of bumps.
The cutting deck unique in its kind,mounts the belt transmission
on a self-supporting plate .
The deck has the only function of conveying.
This allows to replace only the deck,
without having to also replace the transmission
as is the case of all other machines.
on a self-
The deck has the only function of conveying.
This allows to replace only the deck,
without having to also replace the transmission
as is the case of all other machines.
Engine
Briggs & Stratton
Power
17,5
Cylinders
1
Fuel
Petrol
Fuel tank
8 lt
Transmission
Hydrostatic
Forward moving
Pedal
Differential-lock
Yes
Speed
0-8 km/h
Brakes
Standard on transmission and handbrake
Cutting width
75 cm
Cutting
One blade with 2 floating knives at the end
PTO
With electromagnetic clutch
Electric starting
Yes
Hour counter
No
Seat
Standard
Chassis
4 mm stiffened
Wheels
Front: 300-4 tractor Rear: 400-8 tractor
Dimensions
78x180x90h cm
Weight
280 kg
Hydrostatic transmission with drive shafts
from 25.4 mm for enhanced security
and integrated differential lock.
from 25.4 mm for enhanced security
and integrated differential lock.
Engine Briggs & Stratton Intek
single cylinder 17.5 Hp OHV
single cylinder 17.5 Hp OHV
The characteristics and product information contained in the site are approximate and rough and are subject to change.
Narrow Version 78 cm.