Fp 55
Briggs & Stratton engine single cylinder
15.5 Hp OHV.
15.5 Hp OHV.
The cutting deck with toothed belt transmission
allows to keep the phasing of the blades.
A tube connecting the cutting deck
to the turbo charger.
allows to keep the phasing of the blades.
A tube connecting the cutting deck
to the turbo charger.
Lift deck mechanical.
In option it can be mounted a robust
lift deck that avoids having to get off the
machine in the case of small steps.
In option it can be mounted a robust
lift deck that avoids having to get off the
machine in the case of small steps.
Engine
Briggs & Stratton
Power
15,5 Hp
Cylinders
1
Fuel
Petrol
Fuel tank
8 lt
Transmission
Hydrostatic
Forward moving
Pedal
Differential-lock
Yes
Speed
0-9,5 km/h
Brakes
Standard on transmission and handbrake
Cutting width
96 cm
Cutting
2 contro-rotating blades
Collector
240 lt
Turbo charger
Yes, d. 235 mm
PTO
With electromagnetic clutch
Electric starting
Yes
Hour counter
No
Seat
Standard
Chassis
4 mm stiffened
Wheels
Front: 16x6.50-8 Rear.:13x5.00-6
Dimensions
962x220x115h cm
Weight
290 kg
Technical Features
The two dashboards are clean and ergonomic
for ease of use.
The electromagnetic blade engagement
allows to have a simple instrumentation and clean.
The use of such a component also reduces
premature wear of the drive belt.
for ease of use.
The electromagnetic blade engagement
allows to have a simple instrumentation and clean.
The use of such a component also reduces
premature wear of the drive belt.
The cutting deck unique in its kind,
mounts the belt transmission
on a self-supporting plate .
The deck has the only function of conveying.
This allows to replace only the deck,
without having to also replace the transmission
as is the case of all other machines.
mounts the belt transmission
on a self-
The deck has the only function of conveying.
This allows to replace only the deck,
without having to also replace the transmission
as is the case of all other machines.
Grass container with pantograph opening
located behind the driver's seat to be able
perform 2/3 discharges grass one above the other
and limit the discharge area of the cut grass.
Harvesting is done through a turbo-charger
that normally is located on
larger machines and important.
located behind the driver's seat to be able
perform 2/3 discharges grass one above the other
and limit the discharge area of the cut grass.
Harvesting is done through a turbo-
larger machines and important.
The characteristics and product information contained in the site are approximate and rough and are subject to change.
CARON S.R.L.
Via Puisle, 29 - 38051 Borgo Valsugana Italy
Tel. +39 0461 752398 - 754492
C.F./P.IVA: 01546590223
Via Puisle, 29 -
Copyright © 2024 CARON srl. All rights reserved.
